Test Reports & Reviews - �㽶��Ƶֱ�� is the Tuner's Source for Modified Car Culture since 1999

Understanding Audio Radiators w/ KICKER

2023-12-20T20:17:14+00:00

You hear that bump. It’s the ubiquitous association with someone’s massive subwoofer system. That pulsing power that fills you with curiosity and, quite possibly, a bit of envy. Big sound usually means a lot of subwoofers, lots of amplification, and an enclosure that takes nearly every square millimeter of available trunk space - but does the box always have to be so bloody big? Actually, no.

Passive radiators (AKA Reflex Subwoofers) have been around since the 1930s. The use of radiators allows an enclosure to be far smaller than its ported cousins, because of the similarities in resistance to the active subwoofer accompanying it. The goal of the box size and port together create resistance. At the end of the day, that resistance is the tuning frequency of the box, which helps to determine the performance of the speaker and how much power it can take.

Think like a scale, with the box on one side and the active sub on the other. The sub wants air but the box resists, creating pressure. This battle for atmosphere happens hundreds of times per second. Want less resistance? Change the box. The sub plays deeper but it may not play louder. Want a little more punch to the bass? Tighten the box up. It won't play as deeply, but the higher frequencies and the impact will make that kick drum really kick.

“But what can I do if I don’t have tons of room in my trunk for a big enclosure?” you ask. Here’s where the reflex sub comes into play. Tuning a ported enclosure usually comes down to the port length and enclosure size. As those two sliding scales move, so does the response of the sub. Now replace that port with a different kind of resistance – a passive radiator. Change the radiator’s weight or how much it resists pressure (a stiffer suspension), and you get a similar effect as changing the port and enclosure size. The resulting resistance changes the tuning frequency, without needing additional airspace like you would with a ported enclosure. Ultimately, you get a far thinner enclosure that performs like a much larger one, without sacrificing power handling or frequency response.

One misconception is that passive radiators are strictly for subs. In fact, KICKER has been using radiators since 1980, when company Founder, Steve Irby, made his very first production full-range enclosure. A pair of 6.5-inch drivers and piezo tweeters accompanied a single 10-inch radiator in the center. The enclosure was meant to be a full-range solution installed in the back of a single-cab truck. In recent years, radiators have made a resurgence in the KICKER lineup.

“We revisited passive radiators about a decade ago,” says Aaron Surratt, KICKER’s New Product Develop-ment Manager. “We wanted to make a subwoofer that saved space, but took gobs of power and played low. The radiator helped us do that. The design trickled down to the CompRT loaded enclosure, and then to other projects.” Currently, KICKER makes a trio of subwoofer lines, built to take up minimal space under a truck seat or in a cargo area. All three are less than seven inches deep.

Surratt pointed out that without the radiator, the only way to get the enclosure to play low is to include an extremely long port, which increases the size of the overall enclosure. The radiator solves that problem. Even in high SPL applications, where extreme volume and extraordinarily deep bass are commonplace, a radiator can still take the place of a port, and lower the required size of the enclosure without sacrificing performance.

The tradeoff is cost. As of the publishing of this article, research showed the price of passive radiators ranging widely from $13 up to $235, depending on the brand, materials, and feature sets (mainly if the radiator is adjustable or not). Deeper bass often requires additional resistance, so the adjustability of the radiator allows the DIY enthusiast to play with varying weights to find the best balance of bass and efficiency.

Ultimately, deciding on a tuning solution is a matter of convenience and price. The majority of sub enclosures that feature a passive radiator are intentionally thin, made for the crowd who don’t want a big box, don’t want to build their own, and just want it to work. However, if you are more of a mind to tinker and make things sound perfect for your particular taste, grab some wood, a few subs (both active and passive), then ponder the possibilities. The results can be truly impressive.

Kicker ST Series Explained

2023-02-27T22:05:24+00:00

Most every Basshead remembers experiencing their first “windy build.” Tightly contained in an unsuspecting volume knob, the anticipation is akin to voluntarily standing in the path of an oncoming hurricane. It’s a rite of passage containing varying mixtures of terror, anticipation and excitement.

The moment you fire up that first song, those alluring low notes come rocketing toward you with the unique promise of your own private seismic event. Straining against primal in- stincts of fight and flight, the bass rips through your senses. Your eyes can’t focus. Breathing becomes a conscious exercise, and your hair - well, when did you get cast in a Tim Burton film? Three-ish minutes later, the song is over. Your endorphins ebb to a dull roar as your heart rate returns to something under triple digits. Some- how, you feel as though surviving the onslaught of barometric pressure is a sort of achievement, as you mentally tick the experience off of the bucket list. The thrill instinctively begs an immediate question; “Can I have some more?”

Yes, Oliver. Yes, you can - and here’s a hairbrush. You’ll need it about three minutes from now. Keeping the subwoofers from drowning out the voices and instruments in a song can be a massive challenge in ultra-high-power systems. At extreme volume levels, the traditional midrange and tweeter set is completely outclassed, unable to keep up with subs that are deliver- ing volume from tens of thousands of watts or more. In order to fix this rather quickly- identified deficiency, a dramatic addition to the stereo often becomes necessary. Custom door, A-pillar, and kick panels are fabricated, then packed with multiple sets of mid and high-range speakers in an attempt to fill in the system’s otherwise gaping acoustic holes. Only then is every component of the song given a fighting chance of reaching your ears in their intended proportion.

KICKER approaches PA-style tweeters and midrange drivers with two priorities in mind: power handling and efficiency. The ST (aka “Street Series”) 7- and 9-inch speakers are engineered specifically for use in a basshead’s system, using the company’s signature square design. “We used a paper cone because it is extremely efficient, as well as a treated cloth surround. It’s voiced to allow listeners to hear clean, clear vocals through exceptionally loud bass,” reported Aaron Surratt, KICKER’s New Product Development Manager. “It’s perfect for competition- level SPL systems.”

To make the speakers easier to mount in different doors, beefy low-profile ferrite magnets were used. Unlike traditional door speakers, the recommended power rating skyrockets to 300 watts RMS for the ST series 9-inch midrange – literally double the power handling of KICKER’s highest-rated coaxial door speaker, the CS series 6x9. Both sizes of midrange speakers will come in 4 or 8 ohms, allowing the designer to wire multiple speakers in different configurations.

It’s common knowledge in the audio world that every midrange needs a tweeter to go with it, completing the acoustic picture. Creating a tweeter for such a specific environment means that it has to be designed in a decidedly different fashion, cutting through bass while acoustically blending with the song itself. The ST series 1-inch and 1.5-inch bullet tweeters were made for this specific purpose. Both versions are equipped with a long, custom engineered lens to direct the sound over longer distances, then equipped with a replaceable aluminum diaphragm and tuned to project audio long distances; a necessity in high SPL-style setups. To offer installation options, KICKER includes a pair of trim bezels for flush or surface mounting. Completing the sound of competition-level SPL systems requires constant experimentation, exorbitant amounts of power and next-level tuning techniques. To allow the listener to hear the remaining 19,900 frequencies in the audible spectrum in their proper proportion above 100 Hz is the ultimate goal. If KICKER wants us to remember anything, it’s this: for all its fury, bass requires balance.

Waylens Horizon Product Review

2018-12-14T18:22:12+00:00

Waylens Secure360 WiFi Dash Cam Review

2018-11-15T19:21:56+00:00

Cobra Dash 2316D Dash Cam Product Review

2018-10-16T18:01:52+00:00