When you think of automotive tuning hubs in North America, some areas immediately come to mind; Los Angeles, Toronto, South Florida, the Tri-State area and a few select markets. We don鈥檛 hunt for features in Salt Lake City or Omaha for a reason, although we actually have bagged a couple from those areas. Another one of those under the radar areas appears to be Greater Buffalo, but every once in a while you do find some gems. Grand Island, NY resident Mark Abate鈥檚 new Camaro RS is definitely one of them.
When the decoding of the direct injection system is complete, Abate estimates the power to be around 550whp on pump gas with 500lb-ft of torque.
That鈥檚 right 鈥� it鈥檚 an RS with a V6 under the hood. Abate wanted to circumvent the V8-powered SS route that every other builder was taking and go the road no one was driving. More importantly, Abate was dedicated to putting the legendary Camaro back into the limelight with a new twist. 鈥淚 chose the 2010 Camaro because I wanted to be a part of history,鈥� says Abate. 鈥淭he Camaro is one of the most known performance cars of all times. When they stopped making the Camaro in 2002, I felt like someone shot my dog. The domestic performance king was gone. Now that GM has come to their senses and brought back the Camaro, I knew the world would be watching to see how it performs in the market. Myself and SCAP went to great lengths to build our 2010 Camaro and called it 鈥榟eritage鈥� as a tribute.鈥�
No Camaro is complete without some cajones under the hood and Abate was bent on making the 3.6L V6 a true performer. The formula came to light when Abate spec鈥檈d out twin Turbonetics turbos sitting on SCAP custom tube headers. The headers have a pair of Turbonetics wastegates hanging off them before the exhaust heads into a Vibrant / SCAP system. On the chilled side, the intake is a custom SCAP setup with Vibrant air filters. The compressed air heads into a custom Spearco intercooler, where it is vented by twin Turbonetics blow-off valves before hitting the split SCAP intake manifold.
When the decoding of the direct injection system is complete, Abate estimates the power to be around 550whp on pump gas with 500lb-ft of torque. That kind of power is going to give the factory 6-speed box a real work out but Abate maintains it can handle it. The clutch however, had to be replaced with a Clutchmasters unit and a matching lightweight aluminum flywheel.
The high impact part of the build here is definitely the custom widebody. The car turned loads of heads at SEMA 鈥�09, causing a ruckus at the photography studio that emptied area offices as soon as it came off the trailer. The widebody is not some off the shelf kit, nor is it a huge fiberglass and bond experiment, but is instead an all-metal fabrication by Brandon Gorchek, Cody Carpenter and Steve Hodgins at SCAP. The track has been widened to 4-inches up front with 6-inches of more track in the backyard. The bumpers have been modified to match the widened fenders and provide a massive opening for the front mount intercooler. The team at SCAP added a Seibon carbon fiber hood and the entire project was covered with a custom BASF color by Brandon Gorchek at SCAP. Finally, Abate sourced out some new release 1969 Camaro tail lights and fitted them with LEDs for a modern touch.
 |
 |
 |
听
听
Related Articles
Eaton to Showcase GM and Jeep ELocker and Detroit Trutrac Differentials at SEMA 2024
Howell EFI Introduces New LS and LSA Swap Harnesses
ACT Mod-Twin Clutch for LS1/LS2/LS3/LS6/LS7
Massive Audio's New GTR Series and GTX-H Series Subwoofers
Recaro North America is Doing Fine
Tuffy Security Console Safes for 2021+ Chevy/GMC Trucks