Amp Buyers Guide - 2009



Sony XM-GTR2202

The Sony XM-GTR2202 2-channel bridgeable amplifier makes installations easier with High Level “Sensing” Power On inputs so installers don’t need to run a separate turn-on lead, which can make OEM integration installations much faster. On the outside, their slim profile will allow installers to put them in more places and customize their appearance while variable LPF, subsonic filter and bass boost let them dial in the sound. Customers will appreciate the audio performance thanks to large capacitors and improved MOSFET devices. For more information visit


USA -
CAN -

Hex_opt

Diamond Audio HA700.4

The Diamond Audio HA700.4 HEX Series four channel amplifier features the companies new proprietary full range class D topology. This ultra-efficient design provides ample power in a much smaller footprint than a conventional class a/b amplifier. The HA700.4 produces 100 watts per channel into a four Ohm load and 175 watts per channel into a 2 Ohm load and is only available at authorized Diamond Audio retailers.


JL_Audio_HD600_Amp

JL Audio HD600/4

The JL Audio HD600/4 is a super compact, stackable, full-range Class D switching amplifier featuring Single Cycle Control a patented technology from JL Audio. By tracking the audio signal, comparing it to the real PWM waveform and then correcting it in each and every cycle (over 400,000 times per second), amultitudeof distortion causing mechanisms can be tightly controlled to enable pristine amplification.

USA -

CAN -


MB_Quart_Discus_DSC450_Amp

MB Quart Discus DSC450

The DSC450 offers upscale features and incredible sound quality in an amazingly affordable 4-Channel A/B Class amplifier from MB Quart. Variable adjustable active crossover networks and full range preamp outputs provide for easy daisy chaining of additional amplifiers. High speed MOSFET output devices provide superior sound performance at 400 Watts RMS power.

USA -

CAN -


Read on for More Products

Page 2




Focal_Solid_Amplifiers

Focal Solid Amplifiers

The Focal Solid line of amplifiers sport a relatively small footprint and very rugged design. A removable panel hides all the connections, allowing for a stealthy, clean install. The amps also feature high level inputs for easy integration to factory audio systems, or low level balanced RCA inputs for aftermarket integration.


Alpine_KTP-445_Amp

ALPINE KTP-445

Consumers can add higher output and more dynamic response with Alpine’s easy-to-install KTP-445 Head Unit Power Pack, a head unit power upgrade that fits in behind the dash of most vehicles. The Alpine KTP-445 amplifies the head unit power output, resulting in a 150% power increase over the original power from the head unit’s built-in amplifier.

USA -

CAN -



Eclipse_ZA1200_Amp

Eclipse ZA1200

Eclipse’s powerful yet compact ZA1200 amplifier features ICEpower Amplifier Stage incorporating a Dual Feedback Stage for clean accurate audio reproduction for the best sound quality possible. The ICEpower Amplifier has both local and global protection circuits designed for extremely reliable amplifier performance.

USA -

CAN -


Audison_Thesis_TH_Amplifiers
Audison Thesis TH Amplifiers

Receiving the 2008-2009 EISA Award for best in car amplifier, the new Audison TH amplifiers have already proven themselves as truly innovative audiophile components. Through seamlessly blending the benefits of both digital and analog technologies, Audison TH amplifiers represent a new breed of audiophile components. Read a full Performance Auto & Sound review on the Audison TH amplifier in the recent February 2009 issue or on www.pasmag.com.

Read on for More Products

Page 3

MTX_Jackhammer_600_Amp

MTX JackHammer 600

With a name like JackHammer, you have to be able to deliver pure POWER. With patented Active Fan Cooling technology, JackHammer amps control fan speed based on volume level. The louder you crank it, the faster the fans pins to deliver cool air the interior of the amp where it’s needed to play longer and louder. Patented Smart Engage technology makes it easy to add JackHammer amps to any factory or aftermarket system. Best of all, MTX JackHammer amps are CEA-2006 compliant which means you get actual power which is according to the rating. With amps that aren’t CEA-2006 compliant, you never know what you are paying for. MTX JackHammer amps are packed with performance enhancing technology and real world power at a price you can help but drool over.

USA -

CAN -


Kicker_ZX_Series_Amp

Kicker ZX-Series

Kicker ZX-Series amplifiers are as reliable as ever – 21 no-fault options to run a complete car audio system. Two-channel, four-channel, three- and five-channel hybrids, and absurd single-channel subwoofer amps round out a hard-working, noise-free lineup known for supplying the force until the listener shuts the music down.

USA -

CAN -


Boston_Acoustics_GT-2125_Amp

Boston Acoustics GT-2125

Versatile and powerful best describe Boston’s GT-2125 2-channel amplifier. Featuring Boston’s Q-Tune technology that combines a fully adjustable crossover with Q-Control settings to seamlessly transition rear bass to the front sound stage. To ensure optimum performance, the Boston Acoustics GT-2125 features fully adjustable high and lowpass crossovers for exact integration of speakers and subwoofers.


Pioneer_PRS-D4200F_Amp

Pioneer PRS-D4200F

Pioneer’s PRS-D4200F 4-Channel amplifier fills the senses with outstanding music quality while using less power, generating less heat and lower distortion. Part of Pioneer’s Premier Reference Series compact line of amplifiers, the amp produces 75 Watts of power to each of the four channels, a total of 300 Watts, utilizing ICE Digital Power technology.Because these amplifiers are class-FD (Full Range class-D), the amps are considerably smaller in size allowing for more installation flexibility, fitting in tight places such as under a seat. They also feature a variable high pass and low pass crossover from 40-500Hz for added flexibility and speaker level inputs.

Read on for More Products




Oxygen_Audio_OA2200_Amp

Oxygen Audio OA2200.2

Turn it up and turn some heads with the latest Power Series amplifiers from Oxygen Audio. The subtle yet powerful OA2200.2 two channel amp is capable of 1,200 watts mono RMS featuring full MOSFET power supply, full selectable crossover circuit, variable subsonic filter, black die cast nickel plated power / speaker terminals, chrome plated side panels and a white LED logo light.


Cadence_ZRS_Series

Cadence ZRS Series

Cadence is proud to announce the latest release of the new “ZRS” amplifiers. Class D mono amplifiers for tight accurate heart pounding bottom endrated from 700 to 2,000 watts. The ZRS2 channel amplifiers offer reliability, flexibility, and most important sweet sound with power ratings of100x 2, 200x 2, and 300x 2. The 4 channel models round out the line offering great flexibility with powerratings from75 x 4 to100x 4.


American_Bass_VFL100_Amp

American Bass VFL-100.1

The American Bass VFL-100.1 is a terrific 1-Ohm mono stable amplifier for everyday use in various applications. Features includea double-sidedPCB board, bass control knob, 1,500 RMS watts / 3,000 peak and it’s linkable to another VFL-100.1 amp.


Clarion_DPX11551_Amp

Clarion DPX11551

The DPX11551 1,500Wrms subwoofer amplifier from Clarion takes bass to a whole new level of control, dynamics and extension. Forget sloppy Class D amps and let the computer controlled Hybrid Class GH system with its pure analog signal path make your bass hit harder and go deeper than you ever thought possible.

Read on for More Products

Page 5




Soundstream_Reference_Series_Amp

Soundstream Reference series

It has been over a decade since the Soundstream Reference amplifiers graced the car industry. Car audio veterans loved them and New-schoolers have dreamed about them. Only the privileged have heard them! Improving on the best of anything requires new technologies and new applications. Soundstream is proud to re-introduce the new Reference series. Not “dream” amplifiers that will never be seen, but a full line of the finest amplifiers that are available now! Soundstream Reference amplifiers boast damping factors over 1000 and up to 3000+. That is up to, or more than 10 times that of normal amplifiers! There has been a theory for many years saying the human ear cannot hear the difference between amplifiers. Anybody who believes this obviously hasn’t auditioned the long awaited return of the Soundstream Reference amplifiers! Sometimes the best things are worth waiting for.

USA -

CAN -


Arc_Audio_XXD4080

Arc Audio XXD4080

The Arc Audio XXD4080 is an all-new entry level full range Class D amplifier. This well engineered amp features built-in variable crossovers, high efficiency design, concealed mounting points, block style terminals, illuminated logo and high dispersion thermal conductive case material for longer run times and better thermal control in hot climates.


PowerBass_ASA-600_Amp

PowerBass ASA-600.2x

Restyled for 2009 is the updated ASA Series from PowerBass. Shown here is the ASA-600.2x which is a two channel A/B amplifier capable of 300 watts per channel into 2-ohms. The sleek low profile heatsink is less then 2-inches (50mm) tall, allowing these amps to mounted just about anywhere in vehicles of all sizes.



Rockford_Fosgate_Power_Amp

Rockford Fosgate power series

Rockford Fosgate unveils the Power T1000-4, T2500-1bd & T1000-1bd Power Series amplifiers. These new additions were engineered to bring class leading, up to 2500 watts (RMS), power to Rockford Fosgate’s highest performance series. Rockford Fosgate’s legendary high power, low-distortion and Punch sonic signature is perpetuated by class leading technology and superior engineering. The Power T1000-4, T2500-1bd & T1000-1bd all feature proprietary DTM (Dynamic Thermal Management), MOSFET POWER (Power Output Without Excessive Regulation) supply and output sections, on-board PEQ (Punch Equalization) and variable crossovers.

USA -

CAN -

Read on for More Products

Page 6




Cerwin-Vega_Mobile_Stroker_Amp

Cerwin-Vega Mobile Stroker 800.4

Cerwin-Vega Mobile has been providing ground shaking subwoofers for over 50 years but it wasn’t until recently that the company entered the amplifier market. This Class A/B amplifier makes an amazing 125 watts per channel into 4 Ohm and an ear-splitting 200 watts per channel into 2 Ohm making it the perfect amplifier to power mids and highs or a complete system.


JVC_Arsenal_KS-AR9501D_Amp
JVC Arsenal KS-AR9501D

The JVC Arsenal KS-AR9501D is a high-power digital mono amplifier. The KS-AR9501Ds external bridging option allows the use of two amplifiers at once, for a combined output of 3,000 watts RMS. This amp features a Max Power Output of 1,800W, 1,500W RMS (@ 1 ohm), PWM regulated MOS-FET power supply, gold plated RCA jacks, and a blue illuminated LED control panel.

USA -

CAN -


Scosche_1000c1_Amp

Scosche 1000c1

The completely redesigned EFX amplifier assortment has been engineered for the discerning car audio enthusiast. Each amplifier uses a MOSFET power supply and low noise circuitry for the highest performance capabilities. Boasting 0-12dBA variable 45Hz bass boost, high and low level inputs, and five-way protection circuitry (thermal, short circuit, impedance, voltage, reverse polarity) each amplifier is rock solid. The exterior features an illuminated logo badge and brushed aluminum heatsink which complements its sturdy aluminum side panels. The single sided connection layout makes it simple to adjust the system after installation. All EFX mono amplifiers feature an attractive remote level control with power LED.


Realm_A600

Realm A600.4

In recent years the trend has shifted towards appearance with a disregard for accurate sound quality. It’s time for a new Realm of audio; one that brings the focus back to performance and fidelity without compromise. With a passion for design and an emphasis on quality, Realm made it their mission to set a new standard in automotive audio. Realm Amplifiers combine leading edge technology, audiophile grade components and a strict design philosophy to achieve extremely transparent musical reproduction.

Read on for More Products

Page 7




Vibe_LiteAir_Amp

Vibe liteAir

The new range of LiteAir amplifiers by VIBE are the perfect solution for anyone who demands excellent sound quality but from a limited amount of space. The amps are exceptionally small with the footprint of the Stereo 2 being only 7.5 x 5.5 inches and weighing in at 2.4lbs. The LiteAir amplifiers use Class GH Technology which allows them to deliver large amounts of very clean power. Basically they have all the power of a Class D amplifier, but with the clarity and sound quality more comparable to Class AB. These are just a small part of the new VIBE LiteAir range – with speakers, subwoofers and enclosures to follow soon.


Polk_Audio_PA500_Amp

Polk Audio PA500.4

The PA500.4 is Polk Audio’s new 4 channel amplifier that packs an incredible amount of value. It can be configured in a variety of different ways: use it for 4 full range speakers, or a bi-amped component set, or 2 full range speakers and a subwoofer. A remote level adjuster is included for subwoofer use. Cast aluminum textured end caps and an anodized extruded brushed-aluminum cover maximize heat dissipation and hides wiring. High quality components including a high speed MOSFET switching power supply, high current Bipolar Output Transistors and a Double Layer Fiberglass Epoxy Printed Circuit Board brings you maximum performance. 125 watts x 4 (2 ohm) or 250 watts x 2 (4 ohm) continuous power.


NT_Power_SG_Series_Amp

NT Power SG Series

NT Power introduces the SG Series amplifiers with a feature-set rivaling amplifiers priced four times higher and represent a value that will be recognized by all consumers and retailers. The NT Power NT-1872 is a 75 watt (RMS) per channel two channel amplifier that is stereo 2 Ohm stable at 100 watts per channel. In the mono mode the power rating is 200 watts RMS. The NT Power NT-1872 has a full featured built in crossover complete with line level outputs, variable low pass filter 50-250Hz and a variable high pass filter 120-3KHz. An onboard bass boost is selectable between 3dB, 6dB and 12dB.


Memphis_Car_Audio_Power_Reference

Memphis Car Audio

High end just got higher. To provide car audio enthusiasts the highest in sound quality and durability, Memphis Car Audio introduces the Memphis Hybrid five-channel amplifier. With a single power supply, this premium product brings the strength that it takes to make the most of the music. With Mosfet engineering for maximum output, this amplifier is designed to power an entire system. Among a host of technical features are three fully variable built-in crossovers and a remote control to adjust bass settings. The Memphis Hybrid looks as great as it sounds. With all connections and controls on one side, it is easier than ever to achieve a clean installation. The aluminum heatsink has a black anodized angel hair finish. A beveled edge window is diamond cut for sleek presentation of an ice cool blue internal glow that back lights the subtle logo.

Read on for More Products

Page 8




Dual_XiA_Series_Amp

Dual XiA Series

Dual XiA Series amplifiers bring power and versatility to an affordable price. The top end Dual XiA5600 amplifier delivers 200 watts of continuous power to two channels, or 500 watts RMS in single-channel mode with an available 1,000 watts dynamic power. All XiA Series amps offer an ultra efficient power supply for a quick response and die-cast aluminum heatsink incorporated into the black casing.


Hifonics_Brutus_BXI1610D_Amp
Hifonics Brutus BXI1610D

The BXI1610D amplifier includes Hifonics’ exclusive Super D-Class grade microprocessors for an extremely efficient system with smooth digital to analog conversion and low distortion even at high listening levels. The heat sink has been specially designed with vents protected by mesh to increase heat dissipation and reliability. This amp is 1-Ohm stable at 1,600 Watts RMS Power but also runs at 4 or 2-Ohms for a much tighter bass response.


Kenwood_XR-1S_Amp

Kenwood XR-1S Reference Fit

The Kenwood XR-1S Reference Fit amplifier cranks out 1,500 Watts of ear pleasing power in a mere 7-9/16” (D) x 9-1/4” (W) x 2-1/16” (H) package. The XR-1S features a Dual Power Supply ensuring stable operation of internal components even under the most demanding conditions. The XR-1S provides clean natural sound, making this amp worthy of the Kenwood eXcelon badging it proudly displays.

USA -

CAN -