香蕉视频直播

Ask any true car audio tweaker what鈥檚 highest on his or her wish list, and you鈥檇 probably find most of the answers would relate to having the ability to fine tune our systems to our heart鈥檚 content, in search of that elusive 鈥減erfect sound鈥�. Until recently, serious tuning capability was relegated to a handful of high end and high priced digital signal processors, with complicated and sometimes frustrating Graphical User Interfaces (GUIs). But now Helix (a German company with North America distribution from Rockford Corporation), has a new $599 (US) DSP unit that promises tweaking to your heart鈥檚 content with an easy to use set of controls, and a price that鈥檚 not going to break the bank.

The unit is called the Helix P-DSP, and just like the 眉ber-expensive units, the P-DSP will do channel configuration, high and low pass crossovers, extensive equalization and digital signal delay. The unit is controlled and adjusted through proprietary software that can be downloaded from the Helix website. The software is easy to install and once loaded, the layout and control functionality are very intuitive and easy to figure out. This is a good thing, because the owner鈥檚 manual included with the unit provides all the info you need on how to connect things and install the software, but very little information about using the software itself. But with the simple and well thought out interface, it doesn鈥檛 take a long time to become very adept at making adjustments and saving your settings to file names of your own choosing.

On the main control panel you鈥檒l find the settings to configure the channels, each of the eight independent channels can be adjusted in almost any way imaginable, such as left, right or center and either full range, tweeter, mid or woofer. The seventh and eighth channels can be set to any of the above, or two different subwoofer outputs.

Once you have the input signals routed to your chosen output configuration, all that鈥檚 left is the actual tuning! This is where the fun starts, because the Helix P-DSP offers a vast array of tuning possibilities, configurations and settings. There isn鈥檛 enough space to list them all here, but I will touch on the most important adjustments and the things that will be the most useful in getting your system dialed in.

The P-DSP provides the ability to select All Pass, High Pass or Low Pass for any channel, and you can also select High Pass and Low Pass together to create your own custom bandpass crossovers. And I do mean custom, because you have an almost infinite set of frequencies to choose from. The adjustment range covers 20Hz to over 20kHz in very small increments. Once the frequency is set, you then get to select the crossover alignment you prefer, from Butterworth, Bessel, Chebychev, Linkwitz-Riley, or you can even create your own user defined alignment!

There are five available crossover slopes, from -6dB per octave all the way to -30dB/oct in -6dB increments.

Okay, with the crossovers selected and dialed in to the appropriate channels, we move on to the equalizer.

And what an EQ this is! At first blush, it looks like a pretty standard 31 band EQ, but upon closer examination, you鈥檒l quickly discover some pretty cool and very useful functions. First, while the standard 31 band frequencies are shown on the 鈥渟liders鈥� on the control panel, you can adjust the exact frequency of any of the sliders up or down in small increments on each side of the selected frequency. For example, the 1kHz slider could be set to adjust 940, 970, 1000, 1030, 1060, 1090, 1120 or 1150Hz. Cool huh? But there鈥檚 more. Once you have a frequency selected, now you can choose the boost or cut, (from +6dB to -15dB) and then select the Q of the boost or cut you want to apply. And to make it dead simple, a simulation of the resulting response curve is shown on the screen, so you鈥檒l know exactly what鈥檚 going on at all times. If you can鈥檛 EQ your system with this baby, I guarantee you that someone can. If that鈥檚 the case, maybe they should be doing your tuning!

Okay, so you鈥檝e got the crossovers set, the EQ pretty much dialed in (does anyone ever actually finish EQing?), now it鈥檚 time to start fiddling with the staging and imaging. With the Helix P-DSP, you have the ability to adjust the amount of delay on any of the channels individually, to get just the right image placement. To make things simpler, you can choose to make the adjustments using either distance or time increments, whichever is easier for you. Regardless of which way you do it, you can delay the signal in 0.02 millisecond (0.3鈥�) steps all the way up to a delay equaling 12 feet! Each channel also has a 0-180掳 phase adjustment, and a handy mute button for turning off certain channels while making your adjustments.

Okay, so the Helix P-DSP is a pretty cool unit, but there are a few other tricks still hiding up its binary sleeve. While tuning, you can save all your settings to a MicroSD card that plugs into the front of the unit and is then written to the unit鈥檚 memory. The same card can be used to manage firmware updates without having to connect the unit to a computer. If you wanted to save two very different tuning profiles, say one for SPL and one for SQ, you can switch between them by pressing a tiny recessed button on the unit adjacent to the MicroSD card slot. Verification is indicated by a tri-color LED, so you always know what鈥檚 going on.

In the case of connection to an OEM type source unit, turn-on is automatically taken care of with a signal sensing circuit, and a remote output is provided to supply a turn on signal for amplifiers (optional cable required). Do you have an all-digital signal path? That鈥檚 cool, because if you have the ability to provide an optical digital signal from your system, a built-in SPDIF input is also provided, and is also controlled through the software.

On the Bench

On the test bench, the Helix P-DSP proved to be a very accurate, high performance processor. Interchannel gain tracking was as close to perfect as makes no difference, signal to noise was excellent, and crosstalk also measured better than most amplifiers are capable of. The unit has a maximum useable output voltage of 4.0Vrms, and a low output impedance of 85 ohms. It will work well with virtually any source unit, and has high level balanced inputs for connection to an amplified source or OEM radio.

Conclusion

The Helix P-DSP proved to be a competent and easy to use tuning tool, which in many cases puts it at an advantage to some of the overly complex and difficult to use products in this category. Combine that with an attractive price and good build quality, and it鈥檚 a good deal all around. It will provide an astonishing amount of tuning and adjustability, and because the GUIs are well thought out and easy to understand, it could quickly become a pro tweaker鈥檚 favorite.