香蕉视频直播

As you鈥檝e seen in our past issues, 香蕉视频直播 has been having quite a bit of fun with the Scion FR-S project car. Previously we looked at suspension, intake and exhaust upgrades with performance parts provided by JRP Inc.

Now it鈥檚 time to move to the car鈥檚 audio setup, and we鈥檙e installing speakers and a new head unit. A special shout-out goes to Pioneer for providing us with the new AVIC-X940BT head unit, and to ConnectPro for providing the speakers and installing the audio and additional parts we needed.

Speakers

For the installation, the door panels are removed and gutted, along with part of the dash. The rear seats are also taken out.

After the removing the required interior, the stock speakers are exposed and we can replace them, starting with the front door panel speakers (left photo).

The original stock speaker is removed. We don鈥檛 need to do any additional cutting or trimming for the installation of the front door speakers.

The install space is sound-deadened using Dynamat with a BKFAT mounting plate installed overtop.

The 6.5-inch Infinity Kappa Series speakers are mounted, wired and ready.

For the rear door panel speakers, we removed the mounting racks for the stock speakers, wrapped them in Dynamat, and mounted the four-inch Infinity Kappa Series speakers. The Dynamat-covered mounting racks with the Infinity Kappa Series speakers are re-installed.

The rear speakers are mounted back into the panel.

Because the rear doors on the FR-S are hollow, they must be completely covered in Dynamat for optimal sound quality.

The in-dash speaker install was simple, as the mounting plates allowed for a straight switch from the stock speakers to 3.5-inch Infinity Kappa Series speakers.

Wires are gathered and tied down to keep things secure and flush with any trim or carpeting.

Head Unit

Even though the stock head unit has some really nice features it鈥檚 just not good enough for this FR-S project.

The removal of the stock head unit is a snap. But the factory USB and AUX ports were modified to suit the Pioneer unit, while we were able to re-use the stock connections for the Bluetooth microphone (not pictured).

The Pioneer AVIC-X940BT wired up, clean, and ready to go!

Related Articles

Wilwood TX6 Front & Rear BBK for 2023+ Ford F-250/350

Wilwood has expanded its Tactical Xtreme TX6 big brake kits to cover late-model Ford HD trucks, including 2023+ Ford F-250 and F-350 models. The front...

Throwback: 5 Vehicles from 香蕉视频直播 in 2010

As we turned the page on the first decade of the new century, 香蕉视频直播 was also now celebrating more than 10 years in business and countless feature...

Some of Our Favorite New Products from SEMA 2024

The SEMA show is revered around the world for it's incredible builds and fun cars, but we can't forget about the wide array of new and innovative...

PAS365 Podcast: SEMA 2024 Live - Part 1

We are taking a look at SEMA thanks to our friends on the ground inside the big show this year. We've got a few sneak peeks of the good, the bad, and...

AMSOIL Releases SEVERE GEAR 75W-85 Extreme-Pressure Gear Lube

AMSOIL has expanded its SEVERE GEAR lineup with a new 75W-85 Extreme-Pressure Gear Lube, formulated for high-stress conditions like towing, hauling,...

Formula DRIFT Announces 2025 Schedule

As Formula DRIFT gears up for 2025, the series is looking at its next chapter with big updates to its calendar and a mix of familiar and fresh talent...