Any avid car audio enthusiast knows that the choice of loudspeakers for your system is perhaps the single most critical decision of the system design.
It鈥檚 a well-known fact that the speakers you choose make more difference in the final sound of the car than any other component. For anyone who is looking for true high fidelity loudspeakers, the JL Audio brand is almost always near the top of the list. What began way back in the 1970s as a fun hobby for Jim Burch and Lucio Proni (JL Audio, get it?), grew into one of the world鈥檚 most respected audio companies.
While there are a lot of two-way component systems available, we are going to have a look this time at something a bit different: a three-way component system for your car. The JL C5-653 component system is designed for all high-performance audio enthusiasts who have the locations available for a 6.5-inch subwoofer, a four-inch midrange and a sweet silk dome tweeter.
Features and Construction
One of the advantages of a three-way system is the ability to allow the 6.5-inch woofer to be an actual woofer, and not have to compromise it to also cover the upper midrange. In this way, the woofer can be designed for long excursion and improved dynamic performance. When designing a high-end loudspeaker, it is critical that the mass and compliance specifications are very accurate and consistent from one speaker to the next. For those reasons, the C5-653 system employs cones and suspension components for the woofer and midrange drivers from famed supplier, Dr. Kurt M眉ller. M眉ller鈥檚 legendary low-mass cones and butyl rubber surrounds are inherently well damped and allow a less complicated crossover design, which in turn translates into more natural sound. This type of quality doesn鈥檛 come cheap, but JL Audio and many of the world鈥檚 leading home audio companies believe it鈥檚 money well spent. The woofer鈥檚 use cast aluminum baskets and benefit from JL鈥檚 patented Elevated Frame Cooling technology, which uses the spider to pump air directly on the windings of the two-layer copper voice coil. High energy strontium ferrite is used for the magnetic materials in both the woofer and the midrange drivers.
The four-inch midranges are designed to fit in multiple locations thanks to break-away-style mounting tabs. A nice spacer ring is also provided to prevent the tabs from bending when the speaker is mounted using all four tabs. There has been a considerable amount of thought and installer experience put into how these speakers mount, and it definitely shows. The lightweight Kurt M眉ller cones are mineral-filled polypropylene with a curvilinear shape.
The tweeter used in the C5-653 system is an edge-driven 19-mm (0.75-inch) silk dome unit, chosen for its smooth character and overall high-frequency balance. It uses Ferrofluid for improved cooling and is powered by a neodymium motor. The tweeter features a nicely engineered surface and flush-mount mounting fixtures to accommodate any application.
The passive crossover network supplied with the system is yet another bit of cleverly done engineering. Certainly at this level of performance one expects Mylar capacitors and air core inductors, and yes, those are all in place in the critical locations. What really makes this crossover different, however, is the adjustability it can provide. This is where JL Audio鈥檚 vast installation experience and understanding of vehicle acoustics comes into play. There are four levels of tweeter output available and three levels of midrange presence adjustment. The installer鈥檚 ability of tuning these crossovers to suit the installation and speaker locations goes a long way to delivering the best possible sound for the dollars invested.
Listening
After building a new set of three-way baffles for my listening room鈥檚 comparator, I mounted the C5-653 system with the centers of the woofer, mid, and tweeter on a straight vertical line, keeping the three drivers as close together as possible on the baffle. I then set the crossovers to the indicated reference positions, adjusted the amplifier for a full-range signal, and began a very enjoyable listening session. I experimented with a variety of crossover setting positions, finally settling on what I thought was the best sounding settings for my specific situation. One of my habits when evaluating the sound of something is to make notes as I listen. Looking back at my notes as I write this review are the words: 鈥渘atural,鈥� 鈥渟mooth,鈥� and 鈥減leasant.鈥�
The C5-653 system sounds very good, regardless of the musical genre and listening level. Bass output is strong without being overbearing, and the midrange has a natural, smooth timbre. On a few tracks, like the brilliant acoustic guitar in Stanley Myers鈥� Cavatina, I found myself wishing for a little bit more top end detail, but overall it鈥檚 very good. This track was recorded in a mission at San Juan Capistrano, and if you have not heard it reproduced on a good system, you owe it to yourself to track it down and give it a listen. Simply stunning acoustics!
Moving onto other tunes, the bottom end is strong and full, with good definition and detail. Plucked bass strings in Glen Miller鈥檚 Little Brown Jug sounds full and vibrant. The drums and snare are very articulate and well-controlled, even at fairly high volume levels. Even when driven pretty hard, the system never got edgy or harsh sounding, and had some of the most articulate midrange I鈥檝e heard in a while from a car audio speaker. The top end was always clean and sweet sounding with absolutely no edge or brittleness. I鈥檇 bet this system would make a pretty darn good bookshelf system for your home with the right cabinets. I know it sounds better than some of the name brand home stuff I hear in the stores.
Conclusion
At the end of the day, the JL Audio C5-653 component system proved to be a very capable, well thought out, and brilliantly executed speaker system. From the expertly crafted components, to the installation friendly mounting options, and the wonderfully adjustable crossover, there simply isn鈥檛 much not to like. The system is easily worth every penny of the $799.99 (U.S.) MSRP. You don鈥檛 have to take my word for it; just drop into your local JL Audio dealer and audition the system for yourself!
Related Articles
KW Suspensions Coilovers for Ferrari Testarossa
Stingray Brings Karaoke to Select Ford Vehicles
KW Suspensions V3 Coilovers for Hyundai Ioniq 5 N
KW Suspensions First Ever 1991-1998 (W140) S-Class Suspension
Turbokits.com Stage 1 Turbo Kit for 2007-2021 Toyota Tundra 5.7L
PROFORM's New 14,000 Lb Wireless Vehicle Scales